How to fix laptops over heat (Overheat)
Laptops consists of a series of components in the stacking elaktronika which became one to be able to work in such a way to help our daily work. Various electronic components should be electrified to be working. Component of these activities generate heat / heat. It is natural that an electronic device when in a state of functionalized hot lead. but it is not reasonable if the heat was excessive and would probably be fatal if left unchecked.
Based on my experience as a technician laptops, there are two things that most often cause the laptop becomes too hot while working, including:
- Dirty due to dust
- Pasta processors out / dry
Okay we discussed one by one. Dust floating around us, which are invisible are invisible to us, can cause problems on a laptop. besides the use of laptops that do not pay attention to cleanliness lingkunagn work can cause the laptop gets hot. For example a laptop used on the surface / table dusty, users often overlook the physical cleanliness laptop. Such simple things can cause the laptop to heat / overheat more often fatal to restart the laptop again without any command. Do sepelehkan dust, even though she was little and invisible, he can clog the heatsink (cooling system) on the laptop. Simply two years alone, the dust can impede air circulation on the heatsink.
Even with the use of laptops in the extreme (the use of laptops on the environment and dirty surfaces) can be as thick as a carpet cleaner in the circulation of hot exhaust heatsink. To restore the temperature on the laptop, it is often done assembly / disassembly for cleaning is done totally on the components and cooling systems. Actually, the working principle of a laptop cooler is designed to cool and heat away from the laptop, especially the processor. If the note below the surface of the laptop there are holes that will be sucked by the circulation fan is in the laptop and then expelled through the side or back of the laptop (depending on brand laptop). Just imagine if every day in the suction it is dust, dust will stick in the components inside the laptop, and clogging the heatsink fins.
After the last heat for a long time, even for months, then paste (a specially useful material as a conductor / distributor of heat, between the surface of the processor and heatsink) will dry up even evaporate or burn. Because the processors in the state of heat without air can reach 100 degrees Celsius. to overcome it, then it is done by replacing the new paste on the processor cooling system.
Before it all happened on your favorite laptop, so keep your laptop clean and wise in its use Sharing is sexy
Previous Entries
